Product Center
FTR-T series motor soft starter integrates the bypass contactor inside the product, simplifying the cumbersome process of user wiring. It is mainly used for the control of three-phase AC 50/60Hz ±5%, rated voltage 380V-690V, and rated power 8kW-400kW AC asynchronous motors. This product adopts motor control technology and integrates functions such as motor starting, data acquisition and display, motor protection, and soft stopping into one. The simple Chinese and English liquid crystal display interface makes operation simpler and quicker. Users only need to connect an external molded case circuit breaker to meet the motor control requirements.
| Efficiency | 99.95% |
| Voltage Drop | 2.5V per thyristor without bypass,Total value less than 1V with bypass |
| Isolation Method | Photoelectric isolation |
| Kick Start Voltage, Time | 40-100% Ue, 0.02-2.00S adjustable |
| Ramp Initial Voltage, Time | 100-500% Ue, 1-200S adjustable |
| Current Limit Value, Protection Time | 100-500%, 1-200S adjustable |
| Soft Stop Voltage, Time | 50-100% Ue, 1-30S adjustable |
| Starting Overload Capacity | Rating 0-16 |
| Operating Overload Capacity | Rating 0-8 |
| Over Load Protection Value | 800% 1-10s adjustable |
| Unload Protection Value | 50% 1-10s adjustable |
| Analog Input Signal | 0-10V 4-20mA Control accuracy 0.01A all the way |
| Analog Output Signal | 4-20mA current resolution 0.02A all the way |
| Digital Input Signal | Active normally open point, optocoupler isolation, all the way |
| Bypass Relay Output | Touchpoint drive capability AC250V 10A, DC30V 5A |
| Fault Relay Output | Touchpoint drive capability AC250V 5A, DC30V 5A |
| Programmable RelayOutput | Touchpoint drive capability AC250V 5A, DC30V 5A |
| RS485 Communication | One-way communication interface, baud rate 1200 38400bPs, data bits 8,support odd, even, no check, check bit and stop bit total 2 bits |
| Communication Protocol | Supports Modbus-RTU protocol, configurable slave address range 1-128 |
